
Type : TINC - 101 | |
File Size: | 965 kb |
File Type: |
INCUBATOR TRANSPORT Type : TINC - 101
_
Technical Specifications
Model .TINC 101 Electrical Suction ( Optional ) Maximum suction : 400 mm Hg Vacuum gauge range : 0-760 mm Hg Performance Specifications Rise Time : 20 minutes Noise Level inside the unit : < 60 db Operating Temperature : -5ºC to + 30ºC Storage Temperature : -25 to +60ºC Manoeuverability 2 lockable and 2 unlockable castors (optional pair of castor for easy ramp elevation) Infant Bed Dimensions Length : 700mm Width : 300mm Height : 35mm Canopy Dimensions Length : 800mm Width : 430mm Height : 400mm Temperature Module Probe : Thermistor probe Heater Element : Encapsulated heater with fins Accuracy : +/- 0.2ºC Resolution : +/- o.1ºC Accuracy of probe Interchangeability : +/- 0.2ºC Probe calibration : Not required. Range : 25º C to 40º C Voltage : 220V to 240V at 50/60Hz Battery Backup : 3 hrs Alarms Power Down Alarm (More than 10 minutes) System Failure Heater Failure Power Failure (Optional) Battery Low (Optional) Probe Failure Oxygen Supply Incorporates a 3 litre water capacity oxygen cylinder with pin index. Auxillary Cylinder 10 litre water capacity (Optional) |
_
GENERAL FEATURES :
PROTECTIVE environment EASY to move The TINC 101 is a lightweight, easily transportable incubator. Only two care providers are needed to handle it. The flexible design of the TINC 101 makes it suitable for all ambulances. This incubator may be used in conjunction with ventilators and other equipment. It is provided with iris ports that guide all tubing including ventilation tubing. The wide ports of the acrylic infant hood permit convenient access to the infant. The moulded, single-piece infant bed and the interior of the incubator are crevice free and very easy to clean. The bed may be slid readily to provide access to the head of the infant for swift intubation or resuscitation. Multi-position restraining straps hold the infant securely during transport. The TINC 101 features an optional electrically operated suction module and a user friendly control panel that offers strain-free TRANSPORT INCUBATOR TINC 101 viewing. Other features of this incubator include a separate infant temperature probe and a convenient IV pole. The incubator accepts a 5 litre oxygen cylinder and an auxiliary 5 litre cylinder. A quick-fitting pin mechanism connects to the cylinder. A gooseneck lamp is provided to facilitate infant observation even under conditions of darkness. The lamp can provide illumination on any desired area. The operates on its own battery, which can support it for 3 hours, or on power from a vehicle or AC mains. Its stand is optionally fixed or collapsible. With the collapsible option, the stand self-folds at its station in the transport vehicle. Noise and vibration inside the infant crib are minimal. The TINC 101 is backed by the many years of experience Phoenix Has in designing and supplying sophisticated neonatal care equipment worldwide. Phoenix endeavours to meet your every need. If your practice has any special requirement, call the marketing department At Phoenix. They will be happy to provide you a solution. |